Canon CDI-E151-010 - Manual (Page 149)

Appendix 147
3
Move in the direction of the arrow
and insert it into the viewfinder until
it clicks into place.
z To remove the conversion lens adapter, follow
the above steps in reverse order.
4 Turn the teleconverter in the
direction of the arrow to attach it.
zWhen attached to the camera, do not carry
the camera by the conversion lens adapter or
the teleconverter. The camera could detach,
fall and break.
zTo protect the conversion lens, hold the
conversion lens adapter with one hand and
screw the conversion lens onto the adapter
with the other hand.
zYou should not shoot images in (Stitch
Assist) mode when using these attachments.
Although it is possible to select this mode on
the camera, the PhotoStitch software will not
be able to stitch the images together at the
computer.
zCompletely remove all dust and dirt from
conversion lenses with a lens blower brush
before use. The camera may focus on any dirt
that remains.
zBe careful when handling the lenses so as not
to get fingerprints on them.