Source direct key, To cancel source direct function, Press again – Kenwood KA-V9500 User Manual
Page 19: How to listen through headphones, Insert the headphone plug into the phones ■ jack, 3 adjust the volume
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To mute sound temporarily
I Remote control unit only I
I Press again to resume the previous volume.
SOURCE DIRECT key
When this key is pressed, the indicator lights up and the source
selected by the input selector key can be reproduced with a higher
sound quality.
--------Lights u
• The unit enters the bypass mode. In this mode, the input
audio signal does not pass through the parametric equalizer
and balance adjustment circuits, so the tone and balance
adjustments are not effective.
To cancel SOURCE DIRECT function:
Press again.
o----------Goes off
I SOURCE^IBECT^
» The SOURCE DIRECT function is also canceled automati
cally when any Presence mode Is selected or SURROUND
BYPASS mode is set to ON.
If the reproduced sound is distorted, adjust the INPUT LEVEL
control on the rear panel to suppress distortion.
INPUT LEVEL knob
SOURCE DIRECT key
■ How to listen through headphones
Insert the headphone plug into the PHONES
■ jack.
► The [SPEAKERS OFF| indicator lights up.
3 Adjust the volume.
VOLUME CONTROL
KA-V9500 (En)
19