Kenwood KA-V9500 - Manual (Page 40)

Title Edit function (Remote control unit)
■ How to title-edit the model name
This function allows to enter the model name of a component used in your system. [MAX 8 characters)
J Press the TITLE EDIT ON/OFF key.
» TITLE EDIT t
Please select
MXiL NfitJE PRESET or
SLffiROUIC TITLE LIST
► The display returns to the previous condition if no key has
been pressed for about 1 5 seconds.
I Select the component for which the model
■ name is to be entered.
!=□ t=l
s s
n Q
S S
S S
S Q
» This can also be selected with the input selector keys on the
main unit.
3 Select the desired letter or numeral.
• For the characters registered for use in title entry, refer to
Table 1 below.
• TV screen when the CD input selector key is pressed
• TITLE EDIT *
MODEL PRESET
—Enter desired
character
Establish the entry of the selected character.
TITLE EDIT
» The selected character is entered, and the character entry
cursor moves to the right by one position and blinks there.
► Enter other characters by repeating steps 3 and 4.
► I n case of title modification, the previous character is replaced
by the newly entered character.
Move the character position,
if you commit a mistake:
I Move the blinking cursor to the position of the character to
be modified.
> Perform steps 3 and 4 to modify the character.
0 End the entry.
I The entry operation is completed and the title is changed.
I The entered characters appear on the display.
Table 1 83 characters are registered for use in entry.
Every time the or key is pressed, the characters are varied in the cycle as shown below.
r
Uppercase alphabets (A--21 Lowercase alphabets <a~z)
Space symbol
Symbols Arabic numerals (0-9)
EBSHSlSHPnHHnaEQlEHHBE]
40 KA-V9500 fEn)