Kenwood KA-V9500 - Manual (Page 37)

I Creating user's own sound field l Remote control unit onlvT
Based on one of the preset patterns built in the unit, it is also possible to create your own sound field by adjusting
desired parameters.
(5
Select one of the preset patterns.
3
Set the main parameters.
The following parameters are switched in the cycle of © -
(D every time the MAIN key is pressed.
(T) Room Size setting
from 0.Б to 2.0 in steps of 0.1. • Adjust in the range
© Wall setting
PARAMETER
I 5^8 [
• Adjust in the range from 1 to 1 6 kHz in 1 kHz steps.
© Position setting
PARAMETER _____
L1 's.
Adjust in the range from 1 to 100 in steps of 1.
Adjust the parametric equalizer.
Refer to page 26 for the adjustment procedure.
In the DSP mode, the center parametric equalizer is not effective.
Notes:
1, When any other sound pattern key is pressed, the whole setting
of the parameter and parametric equalizer is canceled and
returned to the initial condition which is suitable for the sound
field pattern. When it is required to store the setting you created
in memory, use the Surround Information Memory function
(refer to page 38}.
When any other operation key is pressed, the parametric
equializer is not canceled.
2. Parameters "Reverb Level", "Reverb Time" and "Reverb Densi­
ty" cannot be varied In modes "MOVIE THEATER", "JAZZ
CLUB", "DISCOTHEQUE", "STADIUM" and "SYNTHETIC
MOVIE THEATER".
Set the sub parameters.
The following parameters are switched in the cycle of©^@-
(D 0 © every time the SUB key is pressed.
© Early Reflection Level setting
I MAIM I
• Adjust in the range from 0 to 100 in steps of 1.
© Early Reflection Time setting
I MAIN I
• Adjust in the range from 1 to 60 ms in 1 ms steps.
© Reverb Level setting
I MAIN I
• Adjust in the range from 0 to 100 in steps of 1.
© Reverb Time setting
• Adjust in the range from 0.5 to 4.0 sec. in 0.1 sec. steps.
© Reverb Density setting
PARAMETER
I МАШ I
► Adjust in three steps of High, Mid or Low.
TV display:
Main parameter display Sub parameter display
♦ SUB PARAMETER »
* MAIN PARAMETER *
E.Reflection Level: 70
Room Size 1.5
The parameter whose E,Ref lection Time ' 30ms
VfaUifreq.) 5kHz colon is blinking Reverb Level : 70
Posit ion 40 can be set.
Reverb Time -Z 3s
Reverb Density :High
KA-V9500 {En) 37