Kenwood KA-V9500 - Manual (Page 29)

■ Speaker layouts
It is possible to use either one of two center speakers.
/•
Standard layout
Front Center speakers Front
□ e T ct '" SP SP
4
SPEAKERS
I----- FRONT---------- 1
m am à
© DOLBY PRO LOGIC mode
Set the center mode according to the center speakers used.
... NORMAL (when compact speakers are used)
... WIDE (when medium-sized or larger speakers are used)
© DSP and DSP.LOGIC modes
Press repeatedly until the display becomes a
shown on the left.
I Select the desired sound-field pattern (see page 36).
In case rear (Surround) speakers are not used
I----FRONT-1
a as É
© DOLBY 3 STEREO mode
Set the center mode according to the center speakers used.
... NORMAL (when compact speakers are used)
... WIDE (when medium-sized or larger speakers are used)
© DSP and DSP.LOGIC modes
Press repeatedly until the display becomes a
shown on the left.
I Select the desired sound-field pattern (see page 36).
In case center speakers are not used
Front Front
0
1 TV 1 SP
""o,
SP SP
Rear Rear
—FRONT—^
01--REAR-gl
© DOLBY PRO LOGIC mode
Set the center mode to PHANTOM.
... PHANTOM
© DSP and DSP.LOGIC modes
Press repeatedly until the display becomes as
shown on the left.
* Select the desired sound-field pattern (see page 36).
In case only two speakers are used DSP mode
Press repeatedly until the display becomes a
shown on the left.
• Select the desired sound-field pattern (see page 36).
• The Dolby Surround play is not possible with this layout.
KA-V9500 (En) 29