Screen 6-a ), Delay time, Gautior – Denon AVR-3600 User Manual

Page 13: Betogate'b, Fu fr, Sybwoofer, Screen 6~b ), 4 setting the channel level, Screen 7 ), Channel level crlevei clear

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

4. Use the CURSOR buttons to input the listening position and the distance of the differ­

ent speakers, {screen 6-A)

To select the speakers:

CU^R fv

To select the distance:

CURSOR CURSOR

0^0

^ Select "Default" to return to the initial settings,

5, After the above selections are completed, press the ENTER button again.

The "System Setup Menu" screen reappears.
This procedure automatically sets the optimum surround delay time for the listening

room.

s; If you set an invalid distance, a CAUTION notice, such as screen 6~B will appear. In this

case, please relocate the blinking speaker(s} so that its distance is no larger than the
value shown in highlighted line. Then press the ENTER button again.

^ Set in such a way that the distance to the center speaker is the same as or up to 5 feet

0.5 meters) shorter than the distance to the front left and front right speakers and the
subwoofer.

^ Set in such a way that the distance to the surround left and right speakers is the same

as or up to 15 feet (4.5 meters) shorter than the distance to the front left and front right

speakers and the subwoofer.

FL

FR

Sub
-woofer

Delay Time

-------------

crFL,

FR

T&Siibwooier

^2ft^

Center

12 ft

Q

SL&SR

10 ft

0

Default

V

_______________

( screen 6-A )

Delay Time

GAUTIOr^!

BETOGATE'B

FU FR

&Sybwoofer

{ screen 6~B )

6-4 Setting the channel level

Use test tones to adjust the volume of the different speakers.

1. Use the CURSOR buttons to specify "Channel Level" from the "System Setup Menu"

screen, (screen 7)

A

CURSOR fv

2.

Press the ENTER button.

The "Channel Level" screen (screen 8) appears on the monitor,

3, Use the CURSOR buttons to select "TestTone Mode", then select "Auto" or "Manu­

al".

CURSOR CURSOR

© ^0

A

CURSOR Cv

4, Use the CURSOR buttons to select "Test Tone Start", then select "Yes".

CURSOR

CURSORK

vK

System Setup Menu

Speaker Configuration

ADeiay Time

crChannei Level

’^Digital Inputs

AC-3

Auto Tuner Presets

On Screen Display

Setup Menu Off

( screen 7 )

Channel Level

crLevei Clear ,____ ,

Test Tone Mode

^

► I Manual

Test Tone Start

screen 8 )

13

Advertising