Denon AVR-3600 - Manual (Page 25)

8-11 Multi-source REC OUT recording / playback
While listening to or watching the currently playing program source, you can record another program source (REC OUT mode}, or by connecting the
input jacks of an amplifier, etc., located away from the AVR-3600 (for example in another room) to the MULTI SOURCE output jacks, you can output
the program source to the other location (room) (MULTI mode).
■ Recording a source other than the one currently playing (REC OUT mode)
1. Press the REC/MULTI MODE button until "REC OUT SOURCE" ap­
pears on the display.
Mooe
2
.
3.
Select the source to be output to the recording output terminal.
Press the REC/MULTI SOURCE button repeatedly until the desired
source appears on the display
souptce
DISPLAY
STEREO TUNED^ nm m§
|№ONOCD TUNERVOPT TV VCR1 1 Vm m№El
The indicator of the selected program source lights on the display
at this time.
Set to the audio or video recording mode.
For operating instructions, refer to the manuals of the components
to be used for audio or video recording.
REC OUT select is not possible for TAPE-2 monitor REC OUT.
The signals of the source expect the digital input selected with the REC OUT mode are also output from the MULTI SOURCE AUDIO/VIDEO OUT
terminals.
Digital input signals cannot be recorded. To record, connect to the analog input terminals.
To cancel the REC OUT mode.
Press the REC/MULTI MODE button or the REC/MULTI SOURCE button repeatedly until "SOURCE" appears on the display.
Playing a source other than the on© currently playing in a different room (MULTI mode)
Press the REC/MULTI MODE button repeatedly until "M-SOURCE
SOURCE" appears on the display.
The "MULTI" indicator lights on the display at this time.
Select the source to be output to the MULTI SOURCE output termi­
nal, Press the REC/MULTI SOURCE button repeatedly until the de­
sired source appears open the display.
The indicator of the selected program source lights on the display
at this time.
SOURCE
^ When the MULTI button on the remote control unit is pressed, the
source to be output from the MULTI SOURCE terminals can be se­
lected.
(This cannot be selected when the main unit is in the REC OUT
mode.)
^ The digital signals are not output from the MULTI SOURCE AU-
DIO/VIDEO OUT terminals.
^ To cancel the MULT! mode
Press the REC/MULTI MODE button or the MULTI button on the re­
mote control unit repeatedly until "SOURCE" appears on the dis-
play.
DISPLAY
Auro C«
STEREO TUNEO
!¡>S0N0CP tunes tv VCñl 2 V.AUX DfrAEE|
NOTE:
The signals of the source selected in the MULT! mode are also output from the TAPE and VCR recording output terminals.
25