Denon AVR-3600 - Manual (Page 24)

8-4 Adjusting the TONE control
1. Adjustthe BASS and TREBLE.
8ASS TRESLE
Turn the control clockwise to increase the bass or treble, counter­
clockwise to decrease it.
2. Press the direct button if there is no need to adjust the sound,
DiRECT
8-5 Simulcast playback
Use this switch to monitor a video source other than the audio source.
1. Press the VIDEO SELECT button repeatedly until the desired source
appears on the display.
8-6 Using the muting function
Use this to turn off the audio output temporarily.
%
o o
Moae
o o
O
p..
o
Of VOL
(X)
X
J
1, Press the MUTING button.
iK Cancelling MUTING mode.
Press the MUTING button again.
<D
g o o A
Q3
o
^ Cancelling simulcast playback,
• Select "SOURCE" using the video select button.
® Switch the program source to the component connected to the vid­
eo or AC-3RF input,
8-7 Listen with headphones
Connect the headphones to the PHONES jack.
The pre-out output is automatically turned off when headphones are connected,
8-8 On screen display
Each time an operation is performed, a description of that operation ap­
pears on the display connected to the unit's VIDEO MONITOR OUT ter­
minal, Also, the unit's operating status can be checked during playback
by pressing the remote control unit's ON SCREEN button.
Such information as the position of the input selector and the surround
parameter settings is output in sequence.
8-9 Front panel display
Descriptions of the unit's operations are also displayed on the front pan­
el display. In addition, the display can be switched to check the unit's
operating status while playing a source by pressing the PANEL button.
"PANEL”
‘DIMMER”
«OOC
CD O
S o
o
r>
è
L
“ON SCREEN'
V
0)
8-10 Using the dimmer function.
Use this to change the brightness of the display. The display brightness
changes in four steps (bright, medium, dim and off) by pressing the re­
mote control unit's DIMMER button repeatedly.
¡24