Denon AVR-3600 - Manual (Page 23)

8-2 Playing the analog program source {Stereo playback)
1. Press the button for the program source to be played.
® ® L@
ì(0 d) ® ®
__ WJM: \ *
'(E3.. CE=).CEB ;/\
\i ,,J
iiNJjEft cy^bft)
® o © i
CD CD
*«M>E
O CD
! —/ r ^
2. Select the ANALOG INPUT.
ANALOCyOISITAL
DIGiTAL
G—
Check that the "DIGITAL" indicator is off.
If it is lit, press the button to switch the mode.
3. Select the STEREO mode.
STEREO MODE
-Light off
4. Start playback on the selected component.
For operating instructions, refer to the various comporients’ manu­
als.
5. Adjust the MASTER VOLUME control.
MASTEfl VOLUME
Ji I
L U
Volume level (-60-0-18} is displayed.
8”3 Playing the digital program source
©
CD'
ic=: =)1 □
f - i I rm t I r*~ii t 11 i
cziczii cpcm CZ3C3CZ3CZÌ
o o
è o
1. Press the button for the program source to be played that is con­
nected to the digital input jacks.
2. Select the digital input.
AfiALOG/DIGITAL
3, Check that the "DIGITAL" indicator is lit red.
DIGITAL
.Q.--------- -Red light on
When digital signals are input properly, the DIGITAL indicator
switches from red to green.
^ If the indicator is not lit green, check that the system setup’s input
setting (refer to page 14, 15) and the connections are proper, that
the component's power is turned on, etc.
4, Start playback on the selected component.
For operating instructions, refer to the various components' manu­
als.
5. Adjust the MASTER VOLUME control.
MASTER VOLUME
A
MASTERS,
vh
NOTE: If a CD-ROM is played, the "DIGITAL" indicator is lit green but
no sound is heard.
23