Denon AVR-3600 - Manual (Page 9)

5-5 Speaker system connections
» Connect the speaker terminals with the speakers making sore that like polari­
ties are matched {© with ©, © with © ). Mismatching of polarities wiil result
in weak central sound, unclear orientation of the various instruments, and the
sense of direction of the stereo being impaired.
» When making connections, take care that none of the individual conductors
of the speaker cord come in contact with adjacent terminals, with other
speaker cord conductors, or with the rear panel.
Speaker Impedance
» When speaker systems A and 8 are use separately, speakers with an imped­
ance of from 8 to 16 Q/ohms cart be connected tor use as front and center
speakers.
e Be careful when using two pairs of front or center speakers {A -i- 3} at the
same time, since use of speakers with an impedance of less than l6i3/ohms
will lead to damage,
® Speakers with an impedance of 8 to 16 £2 / ohms can be connected for use as
surround speakers.
o The protection circuit may operate or damage may occur when speakers with
an impedance outside of the above range are used.
Connecting the speaker terminéis
1. Loosen by turning
counterclockwise,
2, Insert the cord. 3. Tighten by turning
clockwise.
CENTER SPEAKER SYSTEM FRONT SPEAKER SYSTEMS
Connection jack for sub­
woofer with bullt-ir) ampli­
fier {super woofer), etc,
SURROUND SPEAKER SYSTEMS