Toshiba TEC MA-1900 - Manual (Page 10)

EOI-11006
5. MANAGER’S OWN OPERATIONS IN “MGR” MODE
5-1. RE-ENTRY OF TRANSACTION DATA RECORDED OUT OF
TRANSACTION BUFFER
This operation is applied only when a PC (Personal Computer) is connected to the system
and the system option “Transaction Data Sending YES’* is selected.
The transaction data, arising from sale entries on the ECR, are first stored into the
“Transaction Buffer” of the ECR. Usually, the data in the Transaction Buffer are
automatically sent to the PC via the Master ECR in any of the following conditions:
1
.
2 .
When the empty area of the Transaction Buffer of the ECR becomes less than the
programmed percent. In this case, the “REG” triangular lamp flickers to warn of the
near-full condition of the buffer. When the empty area regains more than the
programmed percent, the lamp flickering is canceled.
When a Transaction Data Collection command is sent from the PC to the ECR via
the Master ECR.
However, in case Transaction Buffer becomes full before sending the transaction data in the
buffer to the PC, the message “ = = - = =TRAN FULL= = = = = ” is printed after the
Trailer Line (the line of Date, Time, Register No., Clerk ID, Consecutive No.) on the journal.
Sale entries thereafter can normally be registered but the data cannot be stored into the
Transaction Buffer. These data should be re-entered later in the “RE-ENTRY MODE”, as in
the following, to be sent to the PC as transaction data, referring to the sale entry record
marked with the TRAN FULL message on the journal.
Any time outside a sale (Sign On or Cashier Key ON is required.)
Operable on Master or Satellite ECRs
1 [Trainina Mode Sign-ON/OFF Code] [#1 ( = [#/C?D])
01 to 99
“ 1 " is
fixed.
l#l
|DAY-MONTH-YEAR| —]
|MONTH-DAY-YEAR| -
|YEAR-MONTH-DAYl -
The date entry order is determined by the
system option s^ection.
|Register No.
Max. 6 digits
[#]
L».
[Cashier Code| [Consecutive No.|
[#] Sale item entries.
z digits 4 digits
1
,
to RE-ENTRY Mode
End on the next page
- 6 -