Plu version check, Plu version matching – Toshiba TEC MA-1900 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
E01-11006
PLU VERSION CHECK
This can be operated to check the matching of the PLU program data between the Master and
the Satellite Terminals.
OPERATION ON MASTER TERMINAL: (Mode Lock: X or Z / GT Lock: RTR)
32 [ATyTL]
DESCRIPTION:
The Version No. of PLUs in the Master Terminal and the Version No. of each of the
designated
Satellite
Terminals
are printed.
Even
when
the
Version
No. in
a Satellite
Terminal is correctly matching, the Store/Register Nos of the terminal will be printed.
Print Format
Main PLU TaWe
Version No.
Additional PLU Table
Version No.
0032.0000 0021,0000
NoNNNNNNN
0031.0000 0020.0000
NoNNNNNNN
Version Nos in Master Terminal
Store/Reg. No. of a unmatched Satellite Terminal
“ Version Nos in the Satellite Terminal
Store/Reg. No. of a matching Satellite Terminal
(Version Nos are not printed.)
PLU VERSION MATCHING
When the PLU Versions of a Satellite Terminal is found to unmatch those of the Master
Terminal by the above operation or by the auto PLU Check on the Satellite Terminal power-on
(described in Chapter 6), the following may be operated to match the Versions.
OPERATION ON THE SATELLITE TERMINAL: (Mode Lock: MGR / GT Lock: Neutral)
7 X X [#] (x X = Training Mode Sign ON/OFF Code)
DESCRIPTION:
Then the Master Terminal will automatically loads the necessary PLU Table Files (Main or
Additional or both which Version Nos have not been matching in the Satellite Terminal).
- 2 9 -