Toshiba TEC MA-1900 - Manual (Page 31)

EOl-11006
TERMINAL OPEN CHECK
This can be operated to check if terminals are properly connected to the in-line cable.
OPERATION MASTER TERMINAL: fMode Lock: X / GT Lock: RTR)
30 [ATH’L]
DESCRIPTION:
All the terminals are checked if they are opened, referring to the Terminal Connection Table
set in the Master Terminal. The Store/Register Nos of the terminals with no responses are
printed on a receipt. When all the terminals are correctly opened, only the header (X30) will
be printed on the receipt.
Print Format
No nnnnnn
Store/Register No. of the terminal not opened.
SIGN-OFF / HOLD CHECK
This can be operated before taking in-line reset reports, to check if there are any terminals in a
signed-ON condition (for NON-HOLD Reset type with Signing Method) or a not-HOLD condition
(for HOLD Reset type).
OPERATION MASTER TERMINAL: fMode Lock: X / GT Lock: RTR)
31 [AT/TL]
DESCRIPTION:
The Store/Register No. and its signed-ON Cashier codes will be printed (for NON-HOLD
Reset type) or the Store/Register No. and its not-HOLD terminal report Nos will be printed
(for HOLD Reset type) on a receipt. When all the terminals are correctly signed off or in all­
report HOLD conditions, only the header (X31) will be printed on the receipt.
Print Foimat for NON-HOLD Reset type
with Signing Method
No nnnnnn
i C02 C46 C15 C34
Store/Register No.
of the terminal not
signed OFF.
Print Format for HOLD Reset type
No nnnnnn
003 004 Oil 016 117
Storefftegister No.
Cashier Code of the
Cashier not yet
signed OFF
Report No. of the report not yet in the
HOLD condition (GT Report Nos are
indicated with 3-digit No. just as " 117"
instead of "17".)
- 27 -