Introduction, System configuration, System configuration j – Toshiba TEC MA-1900 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EOl-11006
1. INTRODUCTION
Making the most of the functions of the previously developed MA-1900 stand-alone, the MA-1900
can be developed into a master-satellite system.
Using a master terminal designed by adding a master IFU board to an MA-1900 stand-alone and
satellite terminals to which satellite IFU boards are added, the MA-1900 M/S system can comprise
an M/S Manual PLU Entry system made up of up to 32 units or an M/S Scanning System by which
system files having up to 8,200 items can be held by a maximum of 4 units. By connecting a PC,
the system can also be expanded into a transaction data capture system.
Operational functions on each terminal ECR basically stay the same as on a stand-alone ECR,
except those deleted, changed, or added for this M/S system use which are described in this
manual.
Therefore, any detail information not described here, please refer to the Owner’s Manual for the MA-
1900 series issued for the stand-alone level.
2. SYSTEM CONFIGURATION
J
TDLC 31.25KBPS
This system can be configured as one of the following two system types. The number of MA-1900
ECR units that can be connected in each system is indicated below.
(1) M/S Manual PLU entry System Type Max. 32 units
(2) M/S Scanning System Type
Max. 4 units
- 1 -