Redboot network gateway – Comtrol eCos User Manual
Page 113
Chapter 1. Getting Started with RedBoot
/*
* If there is a firewall between you and nameservers you want
* to talk to, you might need to uncomment the query-source
* directive below.
Previous versions of BIND always asked
* questions using port 53, but BIND 8.1 uses an unprivileged
* port by default.
*/
// query-source address * port 53;
forward first;
forwarders {
212.242.40.3;
212.242.40.51;
};
};
//
// a caching only nameserver config
//
// Uncomment the following for Red Hat Linux 7.2 or above:
// controls {
//
inet 127.0.0.1 allow { localhost; } keys { rndckey; };
// };
// include "/etc/rndc.key";
zone "." IN {
type hint;
file "named.ca";
};
zone "localhost" IN {
type master;
file "localhost.zone";
allow-update { none; };
};
zone "0.0.127.in-addr.arpa" IN {
type master;
file "named.local";
allow-update { none; };
};
Make sure the server is started with the command:
# service named start
and is started on next reboot with the command
# chkconfig named on
Finally, you may wish to change
/etc/resolv.conf
to use
127.0.0.1
as the nameserver for your local machine.
9