Fis delete, Name, Synopsis – Comtrol eCos User Manual
Page 161: Arguments, Description, Examples
fis delete
Name
fis delete
— Delete flash image
Synopsis
fis delete {
name
}
Arguments
Name
Type
Description
Default
name
Number
Name of image that should
be deleted.
Description
This command removes an image from the FIS. The flash memory will be erased as part of the execution of this
command, as well as removal of the name from the FIS directory.
Note: Certain images are reserved by RedBoot and cannot be deleted. RedBoot will issue a warning if this is
attempted.
Examples
RedBoot> fis list
Name
flash addr
Mem addr
Length
Entry point
RedBoot
0xA0000000
0xA0000000
0x020000
0x80000000
RedBoot config
0xA0FC0000
0xA0FC0000
0x020000
0x00000000
FIS directory
0xA0FE0000
0xA0FE0000
0x020000
0x00000000
junk
0xA0040000
0x8C400000
0x020000
0x80000000
RedBoot> fis delete junk
Delete image ‘junk’ - continue (y/n)? y
... Erase from 0xa0040000-0xa0060000: .
... Erase from 0xa0fe0000-0xa1000000: .
... Program from 0x8c7d0000-0x8c7f0000 at 0xa0fe0000: .
57