Comtrol eCos - Manual (Page 215)

Chapter 5. Installation and Testing
0xc0000000 - 0xc7ffffff DRAM Bank 0
0xc8000000 - 0xcfffffff DRAM Bank 1
0xd0000000 - 0xd7ffffff DRAM Bank 2
0xd8000000 - 0xdfffffff DRAM Bank 3
0xe0000000 - 0xe7ffffff Cache Clean
Virtual Address Range C B Description
----------------------- - - ----------------------------------
0x00000000 - 0x01ffffff Y Y DRAM Bank 0
0x08000000 - 0x0fffffff Y Y SA-1111 Board flash
0x10000000 - 0x17ffffff N N Board Registers
0x18000000 - 0x1fffffff N N Ethernet
0x20000000 - 0x2fffffff N N SA-1111 Board PCMCIA
0x30000000 - 0x3fffffff N N Compact Flash
0x40000000 - 0x47ffffff N N SA-1111 Board
0x48000000 - 0x4bffffff N N GFX
0x50000000 - 0x57ffffff Y Y flash
0x80000000 - 0xbfffffff N N SA-1110 Internal Registers
0xc0000000 - 0xc1ffffff N Y DRAM Bank 0
0xe0000000 - 0xe7ffffff Y Y Cache Clean
Platform Resource Usage
The SA11x0 OS timer is used as a polled timer to provide timeout support for network and XModem file transfers.
Rebuilding RedBoot
These shell variables provide the platform-specific information needed for building RedBoot according to the
procedure described in
Chapter 3 :
export TARGET=assabet
export ARCH_DIR=arm
export PLATFORM_DIR=sa11x0/assabet
The names of configuration files are listed above with the description of the associated modes.
ARM/StrongARM(SA11X0) Bright Star Engineering commEngine and
nanoEngine
Overview
RedBoot supports a serial port and the built in ethernet port for communication and downloads. The default serial
port settings are 38400,8,N,1. RedBoot runs from and supports flash management for the system flash region.
111