Carrier AQUAZONE 50RLP - Manual (Page 15)

15
Change the Default Password — To change the
default password, perform the following procedure:
NOTE: The password must have already been entered to per-
form this procedure.
1. Press 3 and then . The LID display will show:
Controller Password
2. Press . The LID display will show:
Log in to Controller
Enter Password
3. Press . The LID display will show:
Password
1111
4. Enter the new password (up to 8 digits) and press
. The LID display will show:
Password
(New Password)
5. Press to leave the password screen and return to
the default display screen.
Set the Clock — The user must be logged in to set the
clock. To set the clock, perform the following procedure:
1. Press 1 and then . The LID display will show:
Set Clock
2. Press . The LID display will show:
No Maintenance
NOTE: There is no maintenance information regarding
setting the clock.
3. Press . The LID display will show:
Time
00:00
4. Enter the time. The time is entered in military time (for
example 14.59 for 2.59 pm). Press the button. The
LID display will show:
Day of Week
1
5. Enter the day of week. The numbers 1 through 7 corre-
spond to the days of the week (1 = MON, 2 = TUE,
3 = WED, 4 = THUR, 5 = FRI, 6 = SAT, 7 = SUN). Press
. The LID display will show:
Month
1
6. Enter the number of the corresponding month (1 through
12). Press . The LID display will show:
Day
1
7. Enter the day of the month. Press . The LID display
will show:
Year
95
8. Enter the last two digits of the current year. Press .
The LID display will show:
Update Clock
No
9. Press 1 and then to change display to a YES.
Press . The clock will be updated. Press
twice to view the default display and the clock
should update to the input time and date.
SET
ENTER
EXPN/EDIT
ENTER
CLEAR
SET
ENTER
EXPN/EDIT
ENTER
ENTER
CLEAR
Fig. 9 — Connection to CCN Bus
NOTE: Do not bundle power and
communication wiring with sensor
and device wiring.