GTCO Roll-Up III - Quick Start Guide User Manual
Page 3
Software Configuration
NOTE: To configure Roll-Up III for use with a third-party application, please refer to the
installation instructions in the Roll-Up III User’s Guide, or the Roll-Up III Help file.
Software drivers provide the communication bridge between your software application and
the Roll-Up III. If you received a CD with your purchase, it will either be a GTCO CalComp by
Turning Technologies-supplied CD or a third party CD provided by the software application
vendor. The driver does not need to be installed if you are using the Roll-Up III with GTCO
CalComp by Turning Technologies QuikRuler.
Installing the Driver
Insert the CD into the CD-ROM drive on your computer and follow the onscreen prompts to
complete the driver installation.