GTCO AccuTab VI - Quick Start Guide - Manual (Page 2)

Installing the Driver
Insert the CD into the CD-ROM drive on your computer and follow the onscreen prompts to
complete the driver installation. If the CD does not autorun, click the Start button on the
Windows Task Bar and select Run from the menu. Type X:\setup.exe (X represents the CD
drive letter).
Hardware Configuration
Installing AccuTab VI
NOTE: Connect ONLY USB or the optional serial – not both.
USB Connection – With TabletWorks CD Only –
1. Connect the corded high-accuracy cursor to the appropriate jack on the digitizer’s
Connector Panel. The connector is keyed and will fit only the correct jack. Do not
force it.
2. Attach the USB interface cable to the USB jack on the AccuTab VI Connector Panel.
The connector is keyed and will fit only the correct jack. Do not force it. Join the
other end of the USB cable to any one of the USB ports
on your computer or
USB hub.