Haltech F10 - Manual (Page 13)

8
Adjustable Features
• Base Fuel Map
22 Fuel ranges, every 500 RPM to 10,500, or
17 Fuel ranges, every 1000 rpm to 16,000
32 Load points per range, up to 16ms with 0.016ms resolution
• Correction Maps
Cold Start Prime - 32 points
Coolant Temperature Enrichm ent - 32 points
Air Temperature Adjustment - 32 points
Battery Voltage Correction - 32 points
Closed Throttle (selectable) - 16 points
Full Throttle (selectable) - 32 points
• Programmable Rev-Limit – fuel cut
•••• Fuel Cut on Deceleration
• Accelerator Pump
Increase and sustain paramet ers
Coolant enrichment factor
Three speed ranges
F10A and F10A-8 Only
• Idle Speed Control
Target Idle Speed
Cold Idle-up Rpm
Post-start Rpm setting
F10A and F10A-8 Only
• Closed Loop Control
With both cruise and idle settings
F10A and F10A-8 Only
• Programmable Output Options
Miscellaneous
• Data logging
Engine data inform ation logged at a nominal rate of 10 times per second Stored to memory or disk
Limited only by available memory (approx. 11k/minute).
• Map Storage and Retrieval
Maps may be stored to disk and re-used.
• Real Time Programming
Instant, hesitation free adjustment while engine is running.