14 connect the ecu – Haltech F10 User Manual
Page 26
Advertising
21
PIN
FUNCTION
A
GROUND
B
MAIN
TRIGGER
C N/A
D N/A
E N/A
F
13.8 V DC
For more information on the F10 trigger system; (Refer Appendix D
Trigger Interface,
92).
1.3.14 Connect the ECU
The ECU can now be connected and tested. Be sure to engage the clip on the main connector,
this will make sure the main connector parts mate correctly and reduces the mechanical strain
on the connector bodies. The system can now be tested as described in the following chapters.
Advertising