Heli-Max HMXE0837 - Manual (Page 7)

7
®
INSTALLING THE MICRO SD CARD INSTALLING THE MICRO SD CARD
❏
Flip the model over and push the SD card into the slot on the side of
the camera module. When the card
is correctly installed, it will click. To
remove the card, simply press on
the card again and the inner spring
system will help eject the card. Note:
The card must be in place to program
and capture video or pictures. The
V-cam has no internal memory.
®
PREPARING YOUR RTF MODEL PREPARING YOUR RTF MODEL
❏
Install 4AA batteries in the
t r a n s m i t t e r b y re m o v i n g t h e
battery cover from the back of
the transmitter and installing the
four “AA” batteries. Double-check
the polarity of each battery before
replacing the battery cover.
❏
Turn the trans-
mitter on and make
sure that there is a
blue light behind
t h e H e l i - M a x
panel at the top
of the transmitter.
The LCD screen
should be on with
a throttle position
indicator and other
information. Make sure the electronic trim buttons on the transmitter are
centered. Trims are not needed as the Heli-Max TAGS-FX Sensor Fusion
system controls all flight centering.