HONDA 2006 Odyssey - Owner's Manual - Manual (Page 106)

As the default setting, the elapsed
time resets each time you turned the
ignition switch to the ON (II)
position (see page
).
You can change this resetting
condition to when ‘‘TRIP A’’ or
‘‘TRIP B’’ is reset (see page
).
While the multi-information display
shows ‘‘METER SETUP’’ of the
‘‘CUSTOMIZE GROUP,’’ press the
SEL/RESET button on the steering
wheel. The display changes to
‘‘CUSTOMIZE MENU.’’ Press the
INFO button repeatedly until you see
‘‘ELAPSED TIME RESET’’ in the
lower segment as shown above. Press the SEL/RESET button. The
display changes as shown above.
There are three possible settings:
IGN RESET: The elapsed time
resets each time the ignition switch
is turned to the ON (II) position.
TRIP A RESET: The elapsed time
resets each time the TRIP A is reset.
TRIP B RESET: The elapsed time
resets each time the TRIP B is reset.
76
77
CONTINUED
Elapsed Time Reset
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
105
Main Menu Table of Contents