HONDA 2006 Odyssey - Owner's Manual - Manual (Page 99)

Press the SEL/RESET button. The
display changes as shown above.
The highlighted number is the
current adjustment above or below
the outside temperature. Press the
INFO button repeatedly until the
appropriate number appears, then
press the SEL/RESET button to
enter your selection.
If you sometimes find that the
temperature reading is always a few
degrees below or above the actual
temperature, adjust it as described
on the following pages.
While the multi-information display
shows ‘‘METER SETUP,’’ press the
SEL/RESET button on the steering
wheel. The display changes to the
‘‘CUSTOMIZE MENU.’’ Press the
INFO button once, and you will see
‘‘ADJ. OUTSIDE TEMP. DISPLAY’’
as shown above.
Outside Temperature Display
Adjustment
Multi-Information Display
98
Main Menu Table of Contents