HONDA 2006 Odyssey - Owner's Manual - Manual (Page 347)

Use a wrench to remove the
mounting bolt from the underbody
through the hole in the splash
shield.
Remove the fog light assembly
from the bumper by pulling its
inner edge first, then the whole
assembly out of the bumper.
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
Remove the bulb from the fog
light assembly by turning it one-
quarter turn counterclockwise.
Push the electrical connector onto
the new bulb.
Turn on the fog lights to test the
new bulb.
Reinstall the fog light assembly
into the bumper. Tighten the
mounting bolt.
Insert the new bulb into the
assembly and turn it one-quarter
turn clockwise to lock it in place.
1.
2.
3.
4.
5.
6.
7.
8.
Touring model only
Lights
Replacing a Front Fog Light Bulb
346
Main Menu Table of Contents