HONDA 2006 Odyssey - Owner's Manual - Manual (Page 50)

To remove slack, it may help to put
weight on the child seat, or push on
the back of the seat while pulling up
on the belt.
Push and pull the child seat
forward and from side-to-side to
verify that it is firmly secured. If
the child seat is not secure,
unlatch the belt, allow it to retract
fully, then repeat these steps.
To deactivate the locking
mechanism and remove a child seat,
unlatch the buckle, unroute the seat
belt, and let the belt fully retract.
After confirming that the belt is
locked, grab the shoulder part of
the belt near the buckle, and pull
up to remove any slack from the
lap part of the belt. Remember, if
the lap part of the belt is not tight,
the child seat will not be secure. 5. 4.
Installing a Child Seat
Dr
iv
er
and
P
asseng
er
Saf
e
ty
49
Main Menu Table of Contents