HONDA 2006 Odyssey - Owner's Manual - Manual (Page 274)

Unplug the garage door opener
motor from the electrical outlet.
Hold the end of the garage door
opener remote transmitter 2 to 5
inches from HomeLink. Make
sure you are not blocking your
view of the red indicator in
HomeLink.
Press and hold the remote
transmitter button and one of the
HomeLink buttons at the same
time. Press and hold the remote
transmitter button and one of the
HomeLink buttons at the same
time. While continuing to hold the
HomeLink button, press and
release the remote transmitter
button every 2 seconds.
Plug in the garage door opener
motor, then test the HomeLink
button by pushing it for about 1
second.
If the red indicator in HomeLink
continues to flash slowly (does
not flash rapidly), your remote
transmitter may stop
transmitting after a short time.
Go to step 4.
If the button does not work go
to step 6.
If the button works,
programming is complete.
If the red indicator in HomeLink
continues to flash slowly (does
not begin to flash rapidly),
repeat steps 2 thru 4.
If the red indicator in HomeLink
begins to flash slowly at first,
then rapidly, release both
buttons, and go to step 5.
If the red indicator in HomeLink
begins to flash slowly at first,
then rapidly, release both
buttons, and go to step 5.
2.
3.
1.
4.
5.
CONTINUED
HomeLink Universal Transceiver
Fe
a
tu
re
s
273
Main Menu Table of Contents