HONDA 2006 Odyssey - Owner's Manual - Manual (Page 140)

Each remote transmitter activates
the driver’s seat position memory
system (see page
) and
customized vehicle control settings
(see page
). When you open the
driver’s door after unlocking it with
the remote transmitter, the driver’s
seat moves to the positions stored in
memory. You will hear two beeps
when the movement is completed.
The driver’s seat position memory
activation (Driver 1, Driver 2) is
shown on the back of each
transmitter. Make sure you store
your seat position in the memory
that is activated by the transmitter
you normally carry.
Avoid dropping or throwing the
transmitter.
Protect the transmitter from
extreme temperature.
Do not immerse the transmitter in
any liquid.
If you lose a transmitter, the
replacement needs to be
reprogrammed by your dealer.
Most of the customized settings will
return to the default settings.
To turn it back on, repeat this
procedure. The LED will come on
for 1 second to indicate the feature
has been turned on.
You can turn off driver’s seat
position memory activation with the
remote transmitter. Press and hold
the LOCK and UNLOCK buttons at
the same time. The LED in the
remote transmitter will blink twice.
Then release the buttons, and press
the LOCK or UNLOCK button.
91
165
On Touring models only
Recalling a Memorized Seat
Position Remote Transmitter Care
Remote Transmitter
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
139
With Driver 2 With Driver 1
Main Menu Table of Contents