HONDA 2006 Insight - Owner's Manual - Manual (Page 138)

Open the hood and remove the
engine oil fill cap. Remove the
black cover under the engine. Remove the oil drain bolt and
washer from the bottom of the
engine. Drain the oil into an
appropriate container.
Do not loosen the smaller bolt
located above the drain bolt.
Remove the oil filter, and let the
remaining oil drain. A special
wrench (available from your
dealer) is required.
Make sure the oil filter gasket is
not stuck to the engine block. If it
is, remove it before installing a
new oil filter.
2. 3. 4.
CONTINUED
Changing the Oil and Filter
Ma
int
e
na
nce
137
WASHER OIL DRAIN BOLT OIL FILTER
Main Menu Table of Contents