HONDA 2006 Insight - Owner's Manual - Manual (Page 46)

This indicator has two functions:
See page .
It comes on when you turn the
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. Driving with
the parking brake not fully
released can damage the brakes
and tires.
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position, and when the ignition
switch is turned to the START (III)
position. If it comes on at any other
time, there is a problem with the
ABS. If this happens, have your
vehicle checked at a dealer. With
this indicator on, your vehicle still
has normal braking ability but no
anti-lock function. For more
information, see page
.
If it remains lit after you fully
release the parking brake while
the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For more information, see
page
.
The left or right turn signal light
blinks when you signal a lane change
or turn. If the indicators do not blink
or blink rapidly, it usually means one
of the turn signal bulbs is burned out
(see page
). Replace the bulb as
soon as possible, since other drivers
cannot see that you are signaling.
When you press the hazard warning
button, both turn signal indicators
blink. All turn signals on the outside
of the vehicle should flash.
2.
1.
180
182
122
148
Instrument Panel Indicators
Parking Brake and Brake System
Indicator
Malf unction Indicator
Lamp
Turn Signal and Hazard Warning
Indicators
Anti-lock Brake System
(ABS) Indicator
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
45
U.S. Canada
Main Menu Table of Contents