HONDA 2006 Insight - Owner's Manual - Manual (Page 187)

Check the smaller fuses in the
under-hood fuse box and all the
fuses in the interior fuse box by
pulling out each one with the fuse
puller provided in the under-hood
fuse box. Check each of the large fuses in
the under-hood fuse box by
looking through the top at the wire
inside. Removing these screws
requires a Phillips-head
screwdriver.
If something electrical in your
vehicle stops working, the first thing
you should check for is a blown fuse.
Determine from the chart on pages
and , or the diagram on the
fuse box lid, which fuse or fuses
control that device. Check those
fuses first, but check all the fuses
before deciding that a blown fuse is
the cause. Replace any blown fuses,
and check if the device works.
Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
Remove the cover from the fuse
box.
3. 4. 1.
2.
188 189
Fuses
Checking and Replacing Fuses
186
FUSE
BLOWN
FUSE PULLER
Main Menu Table of Contents