HONDA 2006 Insight - Owner's Manual - Manual (Page 170)

CONTINUED
Place the jack under the jacking
point nearest the tire you need to
change. It is pointed to by an
arrow molded into the underside
of the body. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch. Use the extension and wheel
wrench as shown to raise the
vehicle until the flat tire is off the
ground. Remove the wheel nuts, then
remove the flat tire. Handle the
wheel nuts carefully; they may be
hot from driving. Place the flat tire
on the ground with the outside
surface facing up. 11. 12. 13.
Changing a Flat Tire
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
169
JACKING POINT WHEEL NUT WRENCH EXTENSION
Main Menu Table of Contents