HONDA 2006 Insight - Owner's Manual - Manual (Page 199)

The tires that came on your vehicle
have a number of markings. Those
you should be aware of are described
below. Rim diameter in inches.
Load index (a numerical code
associated with the maximum
load the tire can carry).
Speed symbol (an
alphabetical code indicating
the maximum speed rating).
The tire identification number (TIN)
is a group of numbers and letters
that look like the following example
TIN.
Whenever tires are replaced, they
should be replaced with tires of the
same size. Following is an example
of tire size with an explanation of
what each component means.
Vehicle type (P indicates
passenger vehicle).
Tire width in millimeters.
Aspect ratio (the tire’s section
height as a percentage of its
width).
Tire construction code (R
indicates radial). Manufacturer’s
identification mark.
This indicates that the tire
meets all requirements of
the U.S. Department of
Transportation.
Max Press The maximum air
pressure the tire can
hold.
Max Load The maximum load the
tire can carry at
maximum air pressure.
Tire type code.
Date of manufacture.
P
R
DOT
B97R
FW6X
2202
165
65
14
78
S
Tire Labeling
Tire Size
Tire Identif ication Number
Maximum Tire Pressure
Maximum Tire Load
198
P165/65R14 78S
DOT B97R FW6X 2202
Main Menu Table of Contents