HONDA 2001 S2000 - Owner's Manual - Manual (Page 169)

Cooling System
15. Remove the radiator cap.
16. Pour coolant into the radiator up
to the base of the filler neck and
into the reserve tank up to the
MAX mark.
17. Start the engine and hold it at
1,500 rpm until the radiator fan
comes on. Turn off the engine.
Check the coolant level in the
radiator and add coolant if needed.
18. Install the radiator cap, and
tighten it fully.
19. If necessary, fill the reserve tank
to the MAX mark. Install the
reserve tank cap.
Maintenance
Main Menu Table of Contents