Heating and cooling – HONDA 2001 S2000 - Owner's Manual User Manual
Page 93
Heating and Cooling
To Cool with A/C
1. Turn on the A/C by pressing the
button. The light in the button
comes on when a fan speed is
selected.
2. Make sure the temperature
control dial is all the way to the left.
3. Select
4. If the outside air is humid, select
Recirculation mode. If the outside
air is dry, select Fresh Air mode.
Set the fan to the desired speed.
If the interior is very warm from
being parked in the sun, you can cool
it down more rapidly by setting up
the controls this way:
1. Start the engine.
2. Turn on the A/C by pressing the
button. Make sure the tempera-
ture control dial is all the way to
the left.
3. Set the fan to maximum speed.
4. Open the windows partially. Select
and Fresh Air mode.
When the interior has cooled clown
to a more comfortable temperature,
close the windows and set the
controls as described for normal
cooling.
Air conditioning places an extra load
on the engine. Watch the engine
coolant temperature gauge (see page
) when driving in stop-and-go
traffic or climbing a long, steep hill.
If it moves near the red mark, turn
off the A/C until the reading returns
to normal.
Comfort and Convenience Features
RECIRCULATION
BUTTON
AIR CONDITIONING
SWITCH
FAN CONTROL LEVER
TEMPERATURE
CONTROL DIAL
MODE CONTROL
DIAL
Main Menu
Table of Contents