HONDA 2001 S2000 - Owner's Manual - Manual (Page 202)

Lights
7. Install the new bulb in the socket.
8. Push the socket into the light
assembly and turn it clockwise
until it locks.
9. Test the lights to make sure the
new bulb is working.
10. Install the trunk lining and secure
it with the fasteners. To reinstall a
fastener, reset the fastener by
pushing on the pointed end until it
pops back almost flush with the
fingers on the housing. Put the
fastener in the hole of the trunk
lining and push on the center until
it locks (the center is flush with
the head).
Maintenance
Main Menu Table of Contents