Tires – HONDA 2001 S2000 - Owner's Manual User Manual

Page 190

Advertising
background image

Tires

Tubeless tires have some ability to

self-seal if they are punctured.

However, because leakage is often

very slow, you should look closely

for punctures if a tire starts losing

pressure.

Inspection

Every time you check inflation, you

should also examine the tires for

damage, foreign objects, and wear.

You should look for:

Bumps or bulges in the tread or

side of the tire. Replace the tire if

you find either of these conditions.

Cuts, splits, or cracks in the side

of the tire. Replace the tire if you

can see fabric or cord.

Excessive tread wear.

INDICATOR LOCATION MARKS

Your car's tires have wear indicators

molded into the tread. When the

tread wears down to that point, you

will see a 1/2 inch (12.7 mm) wide

band running across the tread. This

shows there is less than 1/16 inch

(1.6 mm) of tread left on the tire. A

tire that is this worn gives very little

traction on wet roads. You should

replace the tire if you can see the

tread wear indicator in three or more

places around the tire.

Maintenance

TREAD WEAR INDICATORS

Main Menu

Table of Contents

Advertising