HONDA 2001 S2000 - Owner's Manual - Manual (Page 203)

Lights
Replacing a Rear License Plate
Bulb
1. Insert a flat blade screwdriver
between the left edge of the lens
and the housing. The lens will
come down.
2. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
3. Test the lights to make sure the
new bulb is working.
4. Put the lens back into the light
assembly, right side first. Push on
the left edge until it snaps into
place.
Maintenance
Main Menu Table of Contents