HONDA 2001 CR-V - Owner's Manual - Manual (Page 125)

Audio System
SCAN — The SCAN function
samples all the stations with strong
signals on the selected band. To
activate it, press the SCAN button,
then release it. When the system is
in the SCAN mode, SCAN shows in
the display. The system will scan up
the band for a station with a strong
signal. When it finds one, it will stop
and play that station for
approximately five seconds. If you do
nothing, the system will then scan
for the next strong station and play
that for five seconds. When it plays a
station that you want to continue
listening to, press the SCAN button
again.
Preset — You can store the
frequencies of your favorite radio
stations in the six preset buttons.
Each button will store one frequency
on the AM band, and two
frequencies on the FM band.
CONTINUED
Comfort and Convenience Features
PWR/VOL
KNOB
PRESET BUTTONS
SCAN
BUTTON
SEEK BAR
AM/FM BUTTON STEREO INDICATOR
TUNE BAR
Main Menu
Main Menu Table of Contents