Transmission fluid – HONDA 2001 CR-V - Owner's Manual User Manual

Page 226

Advertising
background image

Transmission Fluid

6. Insert the dipstick all the way back

into the transmission securely as

shown in the illustration.

The transmission should be drained

and refilled with new fluid according

to the time and distance recommen-

dations in the maintenance schedule.

5-speed Manual Transmission

Correct level

FILLER BOLT

Check the fluid level with the

transmission at normal operating

temperature and the vehicle sitting

on level ground. Remove the

transmission filler bolt and carefully

feel inside the bolt hole with your

finger. The fluid level should be up

to the edge of the bolt hole. If it is

not, add Honda Manual Transmis-

sion Fluid (MTF) until it starts to

run out of the hole. Reinstall the

filler bolt and tighten it securely.

If Honda MTF is not available, you

may use an API service SG, SH or SJ

grade motor oil with a viscosity of

SAE 10W-30 or 10W-40 as a

temporary replacement. An SG

grade is preferred, but an SH or SJ

grade may be used if SG is not

available. However, motor oil does

not contain the proper additives and

continued use can cause stiffer

shifting. Replace as soon as it is

convenient.

The transmission should be drained

and refilled with new fluid according

to the time and distance recommen-

dations in the maintenance schedule.

Maintenance

Main Menu

Main Menu

Table of Contents

Advertising