HONDA 2001 CR-V - Owner's Manual - Manual (Page 275)

Changing a Flat Tire
22. Lower the vehicle to the ground
and remove the jack.
23. Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
80 lbf.ft(108N.m,11 kgf.m)
CENTER SPACER
24. Put the flat tire on the spare tire
holder. Put the wheel nuts on
finger-tight, then tighten them
with the wheel wrench.
Put the center spacer in the center
of the wheel.
25. Store the jack in its holder. Turn
the jack's end bracket to lock it in
place. Store the tool kit.
Taking Care of the Unexpected
CONTINUED
Main Menu
Main Menu Table of Contents