HONDA 2001 CR-V - Owner's Manual - Manual (Page 273)

Changing a Flat Tire
16. Loosen the five wheel nuts 1/2
turn with the wheel wrench.
JACKING POINT
17. Locate the jacking point nearest
the tire you need to change. It is
pointed to by an arrow molded into
the underside of the body. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
jacking point tab is resting in the
jack notch.
EXTENSION
WHEEL WRENCH
18. Use the extension and wheel
wrench as shown to raise the
vehicle until the flat tire is off the
ground.
CONTINUED
Taking Care of the Unexpected
WHEEL NUTS
Main Menu
Main Menu Table of Contents