HONDA 2001 CR-V - Owner's Manual - Manual (Page 253)

Lights
3. Remove the socket by turning it
one-quarter turn counterclockwise.
4. Remove the bulb from the socket
by pulling it straight out.
5. Install the new bulb in the socket.
6. Reinstall the socket. Turn it clock-
wise until it locks.
7. Test the lights to make sure the
new bulb is working.
8. Reinstall the rear light assembly
into the rear pillar. Reinstall the
three screws and tighten them
securely.
Replacing a Rear License Plate
Bulb
1. Remove the cover by carefully
prying on the edge of the cover in
the middle with a small flat-tip
screwdriver.
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
CONTINUED
Maintenance
Main Menu
Main Menu Table of Contents