HONDA 2000 Accord Sedan - Owner's Manual - Manual (Page 214)

Engine Oil
2. Open the hood and remove the
engine oil fill cap. Remove the oil
drain bolt and washer from the
bottom of the engine. Drain the oil
into an appropriate container.
3. Remove the oil filter and let the
remaining oil drain. A special
wrench (available from your
Honda dealer) is required to
remove the filter.
4. Install a new oil filter according to
instructions that come with it.
5. Put a new washer on the drain bolt,
then reinstall the drain bolt.
Tighten it to:
33 lbf.ft (44 N.m, 4.5 kgf.m)
CONTINUED
Maintenance
WASHER DRAIN BOLT WASHER DRAIN BOLT OIL FILTER
4-cylinder models 6-cylinder models 4-cylinder models
Main Menu Table of Contents