HONDA 2000 Accord Sedan - Owner's Manual - Manual (Page 259)

Lights
Replacing a High-mount Brake
Light Bulb
1. Open the trunk and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
2. Remove the burned-out bulb by
pulling it straight out of the socket.
3. Install the new bulb and reinstall
the socket. Make sure the new
bulb is working.
Replacing a Rear License Bulb
1. Remove the license light assembly
by carefully prying on the left
edge of the lens with a flat-tip
screwdriver and pulling the
assembly out.
2. Remove the lens from the bulb
holder by pulling the lens while
squeezing the tabs on both sides
of the holder.
Maintenance
BULB
Main Menu Table of Contents