HONDA 2000 Accord Sedan - Owner's Manual - Manual (Page 258)

Lights
Replacing Rear Bulbs (in Trunk
Lid)
1. Open the trunk.
2. Determine which of the two bulbs
is burned out: taillight or back-up
light.
3. Remove the socket by turning it
one-quarter turn counterclockwise.
4. Remove the burned out bulb from
the socket by pulling it straight out
of its socket.
5. Install the new bulb in the socket.
6. Reinstall the socket into the light
assembly.
7. Test the lights to make sure the
new bulb is working.
Maintenance
Main Menu Table of Contents