HONDA 2000 Accord Sedan - Owner's Manual - Manual (Page 220)

Cooling System
6-cylinder models
3. Loosen the drain plug on the
bottom of the radiator. The
coolant will drain through the
splash guard. Loosen the drain
bolt.
4. Remove the reserve tank from its
holder by pulling it straight up.
Drain the coolant, then put the
tank back in its holder.
6-cylinder models
When removing the reserve tank,
first remove the cruise control cable
and the ground cable from their clips.
After installing the tank back in
place, put the cables back in their
clips.
CONTINUED
Maintenance
DRAIN PLUG
6-cylinder models DRAIN BOLT
RESERVE TANK RESERVE TANK CAP
6-cylinder models 4-cylinder models HOLDER
Main Menu Table of Contents