IC Realtime Combo Series: 8 Channel DVR with built-in 19 LCD monitor - Manual (Page 13)

4
Bidirectional
Audio 1-ch bidirectional talk input 200-3000mv 10KΩ（BNC）
1-ch bidirectional talk output 200-3000mv 5KΩ(BNC)
Hard Disk 1 built-in SATA port. Support 1 HDD.
Hard disk
Hard Disk
Occupation Audio：G711A 28.125MByte/h
Video：56-900MByte/h
Recording
Mode
Manual recording, motion detection recording, schedule recording and
alarm recording
Priority: Manual recording> alarm recording>motion detection
recording>schedule recording.
Recording
Length 1 to 120 minutes single record duration (Default setup is 60 minutes)
Playback
Repeat
Way
When hard disk is full, system can overwrite previous video file.
Record
Search Various search engines such as time, type and channel.
Playback
Mode Various fast play, slow play speeds, manual frame by frame playback
and reverse play mode.
Various File
Switch
Ways Can switch to previous or next file or any file in current play list.
Can switch to file on other channel of the same time. (If there is a file)
Support file continuous play, when file is end system auto plays the next
file in the current channel
Multi-
channel
Playback There are two playback modes: 4-ch and full-channel. In 4-ch
playback mode, you can select the 1/2/3/4-ch playback according to
your requirement. In full-channel mode, system can playback in full
channels.
Window
Zoom Switch between self-adaptive screen/full screen when playback
Record and
playback
Partial
Enlargemen
t When in one-window full-screen playback mode, you can select any zone
to activate partial enlargement function.
Support peripheral USB backup device. (Flash disk, portable disk and
etc.) Backup
function
Backup
Mode
Support network download and backup
View monitor channel remotely.
Device configuration through client-end and web browser
Upgrade via client–end to realize remote maintenance.
View alarm information such as external alarm, motion detection and
video loss via client.
Support network PTZ lens control
File download backup and playback
Multiple devices share information via corresponding software.
Duplex transparent COM
Network alarm input and output
Network
Function
Network
control
Bidirectional audio.
Motion
Detection Zone setup: support 396(PAL 22×18 ) /330（NTSC 22×15) detection
zones.
Various sensitivity levels.
Alarm can activate record or external alarm or screen message prompt.
Video Loss Alarm can activate external alarm or screen message prompt.
External
Alarm
Support record activation function or activate external alarm or screen
message in specified period.
Motion
Detection and
Alarm
Manual
Alarm
Control Enable or disable alarm input channel
Support analog alarm signal to specific alarm output channel.