IC Realtime Combo Series: 8 Channel DVR with built-in 19 LCD monitor User Manual
Page 34
25
Please check current channel status: “○” means it is not in recording status, “●” means it is in
recording status.
You can use mouse or direction key to highlight channel number. See
X296H296H296H
Figure 4-6
X
.
Figure 4-6
4.2.2.4 Enable all channel recording
Highlight ○ below All, you can enable all channel recording.
z
All channel schedule record
Please highlight “ALL” after “Schedule”. See
X297H297H297H
Figure 4-7
X
.
When system is in schedule recording, all channels will record as you have previously set
(Main menu->Setting->Schedule).
The corresponding indication light in front panel will turn on.
Figure 4-7
z
All channel manual record
Please highlight “ALL” after “Manual.” See
X298H298H298H
Figure 4-8
X
.
When system is in manual recording, all scheduled set up you have set in will be null ((Main
menu->Setting->Schedule)).
You can see indication light in front panel turns on, system begins manual record now.
Figure 4-8
4.2.2.5 Stop all channel recording
Please highlight “ALL” after “Stop”. See
X299H299H299H
Figure 4-9
X
.